Power-Point™ Weld Pins
Welded Insulation Fasteners
|
 |
- Power Point weld pins are used to fasten insulation to the inside of sheet metal air ducts. These fasteners are usually applied when the ductwork is being fabricated. The fasteners have been specifically designed to work with all currently available duct liners and standard resistance welding type application equipment.
FEATURES:
|
|
Prevents tearing of duct liner |
|
|
Forged diamond point design creates more electrical resistance for faster welds. |
|
|
Zinc and Chromate plating exceeds SMACNA standards and gives a more professional appearance. |
|
|
Consistent point quality reduces frequency of machine adjustments. |
|
|
Hardened steel point assures positive electrical contact for complete sheet to pin fusion. |
- APPLIED WITH STANDARD EQUIPMENT
|
Easily applied with Gripnail's Automatic Pin Welder or most standard hand held or hopper fed resistance welders. |
- MANUFACTURED WITH PRIDE IN THE USA
|
To the highest possible quality control standards. |
ORDERING INFORMATION
|
PRODUCT NUMBER
|
RECOMMENDED FOR |
STANDARD PACKAGING |
|
|
#057
|
1/2"
|
All Densities
|
Bulk or Standard
|
|
|
#107
|
1"
|
1-1/2 lb.
|
Bulk or Standard
|
|
|
#127
|
1"
|
3 lb.
|
Bulk or Standard
|
|
|
#137
|
1-1/2"
|
All Densities
|
Bulk (2,500 pcs. per bucket)
|
|
|
#157
|
2"
|
1-1/2lb. & 2 lb.
|
Bulk (2,500 pcs. per bucket)
|
|
|
#207
|
2"
|
3 lb.
|
Bulk (2,500 pcs. per bucket)
|
|
PACKAGING INFORMATION
|
| Bulk packaging is 5,000 pieces per 5 gallon bucket (except as noted) |
|
| Standard packaging is 4,000 pieces per carton (4 buckets/1,000 pieces each) |
|
|
