Drivers
For Metal-Tacks, Punch-Pins, Tack-Mounts & Gripnails
|
|
|
 Driver tips are magnetized for holding Metal-Tack and Gripnail fasteners. Drivers for all Gripnail fasteners have an exposed
length of 2-1/2" and a head diameter of 3/4". Metal-Tack drivers have an exposed length of 1-3/4" and a shaft
diameter of 1/2".
Custom drivers of varying lengths for special applications are available. These drivers are for use with Air Hammer No. 221.
Universal Driver
Flat face for applying all Metal-Tacks, Punch Pins and Swissloks
- #226 standard length
- #326 twin mag
Recessed Drivers
Slight counter bore centers Metal-Tacks and Punch Pins
- #228 - standard length for 33 & 34 series fasteners
- #229 - standard length for 43 series fasteners
- #260 - standard length for 51 series fasteners
Extended Drivers
Reach deeper with extended drivers
- #2282 - 2 inch extension for 33 & 34 series
- #2286 - 4 inch extension for 33 & 34 series
- #2292 - 2 inch extension for 43 series
- #2296 - 4 inch extension for 43 series
Driver for Gripnail insulation fasteners
Drivers for Air Tool Stand
- #239 for 41 series fasteners
|
|
